These full length coilovers are specifically designed for use with the ProComp 6" lift, but may also be compatible with kits from other manufacturers, and eliminates the top mount spacer commonly paired with the OE coilovers on these kits.
ICON Vehicle Dynamics V.S. 2.5 Series coilover shocks are an incredible upgrade for the front end of 1996-2004 Toyota Tacoma/1996-2002 Toyota 4Runner equipped with a 6" lift suspension system. These full length coilovers are specifically designed for use with the ProComp 6" lift suspension system, but may also be compatible with kits from other manufacturers, and eliminates the top mount spacer commonly paired with the OE coilovers with these types of suspension systems. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while lift height adjustability allows the fine tunings of vehicle stance. The larger 2.5” shock body and increased piston area over stock components and application specific length to maximize wheel travel provide improved damping ability and outstanding ride characteristics across varying types of terrain. When paired with ICON 2.0 Aluminum Series or 2.5 Series rear shocks vehicle control will be balanced front to rear, resulting in the best overall driving experience for your Toyota.
  • Adjustable coilovers designed to fit ProComp 6" suspension systems
  • Full length coilover design eliminates top mount spacer used on OE coilovers
  • Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on- and off-road use
  • Superior low speed control reduces body roll and increases on-road stability
  • High quality ICON-engineered coil springs are guaranteed for life against sagging or breakage
  • Corrosion resistant CAD plated shock body with 7/8" shaft
  • Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
  • Bolt-in design makes for an easy install into OEM shock location

Information:

APPLICATION NOTE #185: Will not fit 2WD Tacoma with 5 wheel lug studs

Application Summary:

Year Make/Model
1996-2002 Toyota 4Runner
1995-2004 Toyota Tacoma
Attributes
AAP_UDA_12 EA
AAP_UDA_22 1
AAP_UDA_4 55
Add-On Part 198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 198001 - BILLET SPANNER WRENCH KIT
Adjustable Damping NO, NO
Adjustable Height Yes
Adjustable Rebound No
Assembled Yes
Body Diameter 2.5, 2.5
Boot Included No
California Proposition 65 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Coil Over Springs Included Yes, Yes
Compressed Length 21.62
Country of Origin (Primary) US
Cylinder Color Silver
Cylinder Finish Cadmium Plated
Cylinder Material Steel
Damping Type Oil, Oil
Dust Shield No, No
Dust Shield Included No
Extended Length 26.27
Gas Charged Yes, Yes
Grade Type Performance, Performance
Harmonized Tariff Code (Schedule B) 8708807000
Hazardous Material Code N
Internal Construction Type Single Tube
Life Cycle Status Code Available to Order
Lower Mount Type Eyelet, Eyelet
Material Aluminum, Steel
NAFTA Preference Criterion Code C
Remote Reservoir NO, NO
Reservoir Style Internal, Internal
SDR Required Flag N
Self-Leveling No, No
Service Parts 252010 - 2.5 IFP REBUILD KIT, 257339 - 7/8 SHAFT 13.25 OAL, 9.00 TRAVEL
Shaft Diameter 0.875, 0.875
Shock Absorber Body End Measuring Point Top of Upper Mount Plate, Top of Upper Mount Plate
Shock Absorber Rod End Measuring Point Center of Eylet, Center of Eylet
Spring Color Black, Black
Spring Material Steel, Steel
Spring Rate Type Linear, Linear
Travel Length 4.67, 4.67
Upper Mount Type Mounting Plate, Mounting Plate
Valving Type Digressive, Digressive
Warranty Time 1
GTIN 00840103403786

Write a review.

Note: HTML is not translated.
    Bad           Good
Captcha code